NFS
Product Information
A hydraulic swing clamp is a clamping device that converts
hydraulic pressure into a clamping force to secure the pieces. When the NFS
hydraulic swing clamp is in action, it clamps down vertically after rotating to the
left or right.
The cylinder's body is manufactured with highgrade carbon steel and processed with hardened surface treatment.
The standard angle is 90 degrees, options to customize the angle at 30 degrees, 45 degrees, or 60 degrees are available. Installation of a flow control valve at the oil inlet is highly recommended to control the swinging speed and avoid inertial impact. When the hydraulic cylinder is clamping and pressing downward, the workpiece should be clamped within the lock stroke range.
During the workpiece's loading & unloading period, please be sure to clean the oil seal from the piston rod with an air gun to avoid embedding any particles and chips.
Max. operating pressure: 210 kgf/cm²
Min. operating pressure: 70 kgf/cm²
Single acting and Double acting.
The cylinder's body is manufactured with highgrade carbon steel and processed with hardened surface treatment.
The standard angle is 90 degrees, options to customize the angle at 30 degrees, 45 degrees, or 60 degrees are available. Installation of a flow control valve at the oil inlet is highly recommended to control the swinging speed and avoid inertial impact. When the hydraulic cylinder is clamping and pressing downward, the workpiece should be clamped within the lock stroke range.
During the workpiece's loading & unloading period, please be sure to clean the oil seal from the piston rod with an air gun to avoid embedding any particles and chips.
Max. operating pressure: 210 kgf/cm²
Min. operating pressure: 70 kgf/cm²
Single acting and Double acting.